|
|
|
| |
 |
Peak PK&Pk series compact non-pressurized solar water heater consists of a water tank integrated into the solar collector. Working principle depending on the earth's Gravity. As water in the collector warms, water flows by natural convection through the collector to the storage tank. it can be installed on the roof as top as possible to get enough hot water flow pressure
In an PK integrated collector storage system, also called batch water heater, the water is heated and stored inside the collector and storage tank. It is suitable only for warm climates where there is no risk of freezing. The simple controller can be used to show water temperature, level and control cold water supply or electric heating element work at setting time. |
| specification: |
1) Thickness of bracket: 1.5mm galvanized steel
2) Vacuum tube: 47mmx1500mm
3) Vacuum tube thickness: 1.6mm
4) Inner tank: SUS304-2B food grade stainless steel
5) Outer tank: Steel & Super PVDF coating
6) Insulating layer thickness: 50 - 60mm
7) Inner tank thickness of: 0.4 - 0.5mm
8) Tank diameter: 460mm
9) Capacity: 80L-360L
10) Pressure: 0Pa
11) Heat preservation: 72hrs
12) Hail resistance: 25mm |
|
| |
|
